|
The MBM Triumph 6655 Electric Programmable Cutter is the successor to the popular 6550 EP. It is a fully programmable, highly automated 25.5 inch stack cutter with all of the great features you expect from a high quality stack cutter.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Front Table Depth: | 16.25" |
Motor: | 2 HP |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Size: | 48" D x 39" W x 51" H (61.5" W with side tables) |
Shipping Weight: | 772 lbs. (792 lbs. with side tables) Pounds |
Omni 562 Bottom Front Cutting $438.00 |
Ad Pad Clip $9.95 |
Triumph 5210 Cutting Knife $259.00 |
Big Bench Xtra for 84" Javelin $1,026.00 |
Aluminum Snap Rail End Cap $66.00 |
1 x 2" Screw Lock Rings | $28.52 |
1 x 6" Screw Lock Rings | $37.01 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x MASTER SWITCH | $531.60 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x TBD - LFT WASHER 1/2 INTFTL. | $23.68 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x Polar 115 Cutting Knife | $642.00 |
1 x RUBBER BRG | $16.87 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x SAFETY THERMASTAT 724.00696.00 | $137.52 |
1 x 3/8 DRILL BIT 2IN CD-6 | $141.13 |
1 x 4" Screw Lock Rings | $29.47 |
1 x FLAT BELT 941-40120 | $73.40 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Camco 250 (16") Cutter Knife | $186.00 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x Adhesive for Horizon BQ-160 PUR | $69.95 |
1 x 23" Knife Guard | $46.00 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x 62364 36" Stand for 60” Sabre Series 2 | $562.50 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Master Feed Clutch/DP-e Series | $64.94 |
1 x Miracle LMM 63 Cutting Knife | $336.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x TOP FUSE ASSY | $36.91 |